Keynote & Invited Speakers(2021)
               
Driving and Delivering High Performance Compute and Graphics Solutions
Mr. Allen Lee, Corporate Vice President, GM of China R&D Center, AMD
     
Nanolithography Milestones and Future
Dr. Burn J. Lin, CEO, Linnovation, Inc
   
                 
Ferroelectric Field Effect Transistor: A Novel Computational Memory
Dr. Suman Datta, Professor, University of Notre Dame
     
Enabling Specialty Applications in the IoT Era
Dr. Zheng Yuan, Vice President and General Manager, Specialty Products and Technology, Applied Materials, Inc
   
                 
Partial List of Confirmed Distinguished CSTIC 2021 Invited Speakers
                 
High Yield and Superior Quality/Reliability of IGBT and Power Devices at AI Era
Minhwa Chi, SVP, SiEn (Qindao) Integrated circuits, China
     
Frontiers in Low-frequency Noise Research in Advanced Semiconductor Devices
Eddy Simoen, IMEC and University of Gent, Belgium
   
                 
Innovative Future Etch Technology by Atomic-order Control
Yoshihide Kihara, Director, Tokyo Electron Limited, Japan
     
The Latest Development and Results in Advanced Technoogy Nodes Patterning
Rich Wise, Lam Research, US
   
                 
Advanced Packaging Architectures for Advanced Heterogeneous Integration (HI)
Ravi Mahajan, Fellow, Intel
     
A New Generation Cost-efficient Laser Mask Writer for Mature Semiconductor Nodes
Peter Henriksson, System Architect, Mycronic AB
   
                 
2-D Logic Device Scaling to Forksheet, and Technical Challenges to Nanosheet / Forksheet Configurations
David Xiao, Program Manager of Core CMOS scaling, IMEC, Belgium
        Advanced Dry Removal Technology for Patterning
Hua Chuang, VP, Mattson, US
   
                 
  The Latest Development and Results on CCP Etch Applications
Xingcai Su, GM, AMEC, China
        Advanced Materials and Process Technology for Patterning
Ajay Bhatnagar, Sr. Director, Applied Materials, US
   
                 
Perspective on Plasma Etching in Advanced Packaging
Dr. Yuanwei Lin, Process Engineer, NAURA, Beijing, China
        Patterning Challenges andPerspetive Solutions for Advanced Technology Nodes
Da Yang, Director, Tokyo Electron Limited, US
   
                 
Practical Solutions to the Challenges of Quantitative Radical Species Sensoring in Process Plasmas
Jianping Zhao, SMTS, Tokyo Electron America, US
     
New Frontiers of Device Fabrication with Atomic Precisio
Peter Ventzek, Senior Manager, Tokyo Electron Limited, US
   
                 
Fin Self-Aligned Quadruple Patterning (SAQP) Process Development with Domestic Made Tools
Yushu Yang, Shanghai IC R&D Center, China
     
Hardware/Software Co-Design of Deep Learning Accelerators
Yiyu Shi, Associate Professor, University of Notre Dame, US
   
                 
Multi-GPU Acceleration for Global Placement
Yibo Lin, Assistant Professor, Peking University, China
        Advancing to the Next Node and Competing Globally Using Virtual Fabrication
Joseph Ervin, Director, Lam Research
   
                 
Monolithic Integration of Thin Film Photodiode with CMOS Technology for Infrared Imaging Applications
Yunlong Li, Senior R&D Engineer, IMEC, Belgium
     
Keys to Extending Cu Interconnect to 3 nm and Shift to Alternative Conductor
Takeshi Nogami, IBM Research
   
                 
  Theoretical and Experimental Approach to Design CVD/ALD Processes
Yukihiro Shimogaki, Tokyo University, Japan
     
Area Selective Deposition: fundamentals and applications
Silvia Armini, IMEC, Belgium
   
                 
Application Investigation of Co-Ti Alloy as Single Liner/Barrier in Advanced Co Interconnects
Luo Jun, Professor, IMECAS, China
     
Advanced Memory and Logic Patterning Trends and Applied Material’s solutions to meet the Technical Challenges
Dimitri Kioussis, Applied Materials
   
                 
  Galvanic Corrosion Caused by Device Structure in Chemical Cechanical Planarization
Lei Wang, Manager, Hikstor Hangzhou, China
     
Electronic Design Automation for Emerging Technologies
Giovanni De Micheli, Professor and Director, EPFL Lausanne, Switzerland
   
                 
Proactive Supply Noise Mitigation and Design Methodology for Robust VLSI Power Distribution
Masanori Hashimoto, Professor, Osaka University, Japan
     
Valid Test Pattern Identification for VLSI Adaptive Test
Tianming Ni, Associate Professor, Anhui Polytechnic University, China
   
                 
Advancements on Parasitic Extraction Research and Related Challenges
Wenjian Yu, Associate Professor, Tsinghua University, China
     
Ensuring System-Level Resilience for Embedded Systems
Ulf Schlichtmann, Professor, Technical university of Munich, Germany
   
                 
The Investigation of SiC CMP with High Efficiency
Weili Liu, Professor, Shanghai Institute of Microsystem and Information, China
     
Challenges in Chemical Mechanical Polishing and Post CMP Cleaning of GaAs and InP
Baoguo Zhang, Professor, Hebei University of Technology, China
   
                 
TSV and Hybrid Bonding Solutions for 3D Heterogeneous Integration Packaging Applying in next AI / HPC Era
Albert Lan, Global Sr. Packaging Technical Director, Applied Materials
        The Novel Etching Process for Dense Array Magnetic Tunneling Junctions Manufacturing
Taiyen Peng, Senior Director, Leuven Instruments, China
   
                 
FEOL Reliability in Gate-All-Around Nanosheet Devices
Miaomiao Wang, Research Staff Member, IBM, US
     
Negative-tone imaging (NTI) for advanced lithography with EUV exposure to improve 'Chemical Stochastic'
TORU FUJIMORI, Research Manager, FUJIFILM Corporation
   
                 
Maskless Optical Nanolithography for Efficient Cross-scale Patterning
Xuanming Duan, Professor, Jinan University, China
     
Interconnect-centric Benchmarking of In-memory Acceleration for DNNs
Yu(Kevin) Cao, Professor, Arizona State University(ASU), US
   
                 
  Modeling of Ferroelectric FET
Kai Ni, Assistant Professor, Rochester Institute of Technology, US
     
CMOS Device Design With Ferroelectric Materials
Changhwan Shin, Professor, Sungkyunkwan University, Korea
   
                 
Source/Drain Contact Technology for Next-Generation Field-Effect Transistors
Hyun-Yong Yu, Professor, Korea University, Korea
        High Performance Electronics Based on Ultrathin Novel Channel Materials
Yanqing Wu, Professor, Peking University, China
   
                 
Trends and Challenges in Multisensory Integration
Ming He, Assistant Professor, Peking University, China
     
Full Chip Curvilinear ILT with both Multi-Beam and VSB Mask Writers That Doubles Wafer Process Windows
Leo Pang, Chief Product Officer, D2S, US
   
                 
Multiscale Contact Behavior in CMP and its Correlation with Polishing Pad Properties
Ping Zhou, Professor, Dalian University of Technology, China
        Explore the pathway on CMP pad with CMC Materials
Rui Ma, CMC
   
                 
Computation-In-Memory with Memristors for Neuromorphic Computing
Jianshi Tang, Assistant Proferssor, Tsinghua University, China
     
Copper corrosion issue analysis and study on advanced cmp process
Lei Zhang, Principal Engineer, Shanghai Huali Integrated Circuit Corporation
   

               
  Artificial heterostructures enabled by stacking single-crystalline freestanding membranes
Jeehwan Kim, Massachusetts Institute of Technology(MIT), US
     
Surface Redox Buffering Effects on FET Based DNA Sensors with a Gold Sensing Gate
Zhen Zhang, Professor, Uppsala University
   
                 
  Far-field optical detection of 10nm Si nanoparticle
Stas Polonsky, Samsung, Russia
     
Van der Waals heterostructures for optoelectronic and electronic devices
Kaiyou Wang, Director, State Key Laboratory for Superlattices & Microstructure
   
                 
Polarization-Sensitive Photodetectors based on 2D Layered Semiconductors
Zhongming Wei, Professor, Institute of Semiconductors, CAS
     
Loss Mechanisms of Multi-frequency Whispering Gallery Mode RF-MEMS Resonators
Jinling Yang, Professor, Institute of Semiconductors, CAS
   
                 
Customizing CMP Pads
Hongqi Xiang, General Manager, Inventech Materials Co., Ltd
     
Nanoimprint Performance Improvements for High Volume Semiconductor Manufacturing
Keita Sakai, General Manager, Canon Inc.
   
 
       
   

Reference Metrology Using 3D-PSD of Post-Etch LWR
Masami Ikota, Application Engineer, Hitachi High-Tech Corp.
        Extending the capability of lithography with mechanical processes
Huigao Duan, System Architect, Hunan University
   
                 
Update of >300W High Power LPP-EUV Source Challenge III for Semiconductor HVM
Hakaru Mizoguchi, Senior Fellow, Gigaphoton.
     
Integrated Optical Metrology Solutions for Advanced IC Fabrication
Jonee Li, Optical BG General Manager, Shanghai Precision Measurement Semiconductor Technology
   
                 
  The Impacts to Lithography Process Windows by Different Pattern Split Methods
Jinhua Min, Senior Engineer, Shanghai IC R&D Center.
        A General PWC GUI automation testing framework--PWC Robot ATF
Annie An, Engineer, ASML
   
                 
  Contour based process characterization, control and hotspot prediction for semiconductor manufacturing
AO CHEN, Technical Marketing Manager, Mentor, a Siemens Business
        ML enhanced full-flow design guided wafer defect analysis and reduction
Qian Xie, Product Engineer, a Siemens Business
   
                 
  193i lithography's path to the future
Stephen Renwick, Director of Imaging Physics, Nikon Research Corp of America
        An innovative graphical platform for real time accurate AEI overlay prediction and rework control
Yaobin FENG, senior director, YMTC
   
                 
  Simulation investigation of resolution enhancement techniques (RETs) for EUV single patterning of logic Via layers in 5nm nodl
Boer Zhu, Technical Engineer, ASML
        Progress and outlook towards High-NA EUV materials
Jara Garcia Santaclara, Architect, ASML
   
                 
  Feed-forward correction of on-product overlay using standalone alignment technology
Masahiko OKUMURA, Assistant Department Manager, Nikon Corporation
     
Overlay metrology based on Mueller matrix scatterometry
Hao Jiang, Professor, Huazhong University of Science and Technology
   


     
   

In-Memory Computing towards the POS/w era ---an algorithm–architecture co-design approach
Li Jiang, Shanghai Jiaotong University
     
A Co-Design Framework of Neural Networks and Quantum Circuits Towards Quantum Advantage
Weiwen Jiang, Post-Doctoral Research Associate, University of Notre Dame, US
 


     
   
Opportunities and challenges of wet process tools for wafer level package manufacturing driven by 3D technology
David Wang, ACM Research (Shanghai), Inc.
     
Improving Design Resilience Against Process and Voltage Variation
Wei-Kai Shih, R&D Manager, Synopsys
 

             
On Device AI for AR Systems
Meng Li, Facebook Inc., USA
     
Chip Level ESD/Latch-up Design Verification Automation
Frank Feng, Director, Synopsys
 

             
Full Chip Reliability Verification by Netlist Driven Layout Methodology
Jonathan White, R&D Director, Synopsys, US
        Mass Metrology Solution for 3D Process-Monitoring
Jiangtao Hu, Director, Lam Research, US
 

             

Mid-Infrared Critical Dimension Ellipsometry and Advanced Machine Learning to Address Complex Semiconductor Manufacturing Metrology Challenges
Franklin Wong, Senior Applications Manager, Onto Innovation, US
     
The Development of 3D IPDs on Glass Wafer
Daquan Yu, Xiamen Sky Semiconductor Co., Ltd.